How to get a drive formatted with exfat working?


Whether you’re formatting an internal drive, external drive, USB flash drive, or SD card, Windows will give you the choice of NTFS, FAT32, and exFAT. The Format dialog in Windows doesn’t explain the difference, so we will.

FAT32 is an older file system that’s largely relegated to USB flash drives and other external drives. Windows uses NTFS for its system drive, and it’s also ideal for other internal drives. exFAT is a modern replacement for FAT32, and more devices support it than do NTFS — although it’s not as widespread as FAT32.


FAT32 is the oldest file system here. It was introduced all the way back in Windows 95 to replace the older FAT16 file system.

This file system’s age has advantages and disadvantages. Because it’s so old, it’s the de-facto standard. Flash drives you purchase will often come formatted with FAT32 for maximum compatibility across not just modern computers, but other devices like game consoles and anything with a...

0 0

Answer #: 1

Turns out the packages from the official repositories do the trick, as long as you do a restart after installing them.

Install exfat-utils and exfat-fuse packages from the official repos:

sudo apt-get install exfat-utils exfat-fuse

Reboot your computer:

sudo reboot

After reboot you will have a working exfat file system (read and write support, but not formatting the drives with exfat via Gnome Disks and GParted).

Thank you for all the suggestions, especially the PPA from relan, but the packages in that PPA are older than the ones in the official repositories. This might change when updates start coming in, as the PPA might include new releases more quickly.

Answer #: 2

Finally get it to work on my 13.10.

I did:

sudo apt-add-repository ppa:relan/exfat sudo apt-get install fuse (only fuse)

and lastly

sudo apt-get install exfat-fuse (instead of fuse-exfat)

Plugged my External HD and it’s working...

0 0

This answer explains how to format a drive in the exFAT or FAT32 file format. This allows the drive to be used on both Windows and Mac OSX.*END


A Western Digital external hard drive can be used on both Windows and Mac OSX. This is useful if a drive is being used under both Operating System (OS)

to move files between the two environments. Most WD Drives come formatted in the

NTFS (Windows)


HFS+ (Mac)


For a hard drive to be able to be read and written to in both a PC and Mac computer, it must be formatted to exFAT or FAT32 file format. FAT32 has several limitations, including a 4 GB per-file limit. This is a file system limitation that affects both Mac's and PC's, and the only workaround is to format the drive to exFAT. For more information about what these limitations are please see Answer ID 1287: File and partition size limitations using the FAT32 file system.

The easiest way to format the drive to FAT32 or exFAT...

0 0

Using an external drive between Mac and Windows computers can be a hassle, since you constantly have to reformat it to fit which computer you're using it on. Instead of reformatting it all the time, just use the much more platform-independent exFAT and never format it again.

Windows' default NTFS is read-only on OS X, not read-and-write, and Windows computers can't even read Mac-formatted HFS+ drives. FAT32 works for both OSes, but has a 4GB size limit per file, so it isn't ideal. You can always install drivers for those other OSes, but that doesn't help when you're sharing files with your friends' computers. Besides, it's kind of a hassle. The exFAT file system is a much simpler option.

exFAT has been around for awhile, but we've never really talked about it. Essentially, it's a file system that's both readable and writable on any modern Mac or Windows machine (sorry, Leopard users). All you need to do is format the drive on a Windows machine and you're good to go....

0 0

If you have an external hard drive or USB flash drive that you’d like to use on both Macs and Windows PCs, choosing the right file system to format the drive can be confusing. Learn a few ways to make your drive Mac and PC friendly.

Need to access or transfer files between Mac and PC? As simple as this task sounds, it’s not very straightforward for inexperienced users. Since Mac OS X and Windows use totally different file systems, the way a drive is formatted can determine what type of computer it will work with. In fact, there are four ways you can format an external or USB flash drive to achieve varying degrees of compatibility between Macs and PCs. Let’s take a look at them:


Mac OS X’s native file system is HFS+ (also known as Mac OS Extended), and it’s the only one that works with Time Machine. But while HFS+ is the best way to format drives for use on Macs, Windows does not support it. If you’re only going to be using your external or USB flash...

0 0

USB flash drives are the little stick-like devices that we carry along in our pockets as portable external storage. But these little devices pack quite a punch; they can double up as your portable movie library, photo collection, backup drive, OS boot volume, or just a way to transfer stuff from one computer to another. Each time you wish to use them for a unique purpose, it requires cleaning them and sometimes even formatting them to a file system suited to the target environment. Formatting is also a good way to rid the memory stick of unwanted errors or virus / malware programs.

Once you format your USB drive, it is difficult to get your important data back unless you take the help of a third party tool.

Please note, that in order to recover your photo/video or audio collections from infected, corrupt or inaccessible USB drive, download our recommended software.

One important thing to remember is always take a backup of your data before beginning the...

0 0

The exFAT file system allows storage units to support larger file sizes previously limited by FAT32. This file system is designed primarily for portable devices, enabling greater interoperability between peripherals and other operating systems. You can easily format any storage unit using Windows 7’s main disk management options.

Step 1

Connect the storage unit to your computer. Click the Start button, then click “Computer.”

Step 2

Right-click the drive you wish to format from the left or the right pane; select “Format” from the context menu options.

Step 3

Click the File System drop-down box and select “exFAT.” Optionally, apply a name to the drive from the Drive Label field while leaving all other default options intact.

Step 4

Click “Start” to initialize the procedure, which generally takes several seconds.

Step 5

Click “Close” once the system formats the drive in question.

Tips &...

0 0

Guru Kiran G's method didn't work for me. And the command line "Format /FS:fat32" failed after about 45 minutes. When it reaches 99% complete it reports a problem formatting the drive.

FORTUNATELY, further searching found a solution: A small utility available from Verbatim did it in about 10 seconds. The app is named "SmartDisk_FAT32_tool.exe" and not only took care of my 64GB drive but also a 128GB USB3 drive, though that one took about 2-3 minutes. It kept pausing at seemingly random sectors, making me wonder if it marked any bad, but a CHKDSK said otherwise:

E:\>chkdsk e:
The type of the file system is FAT32.
The volume is in use by another process. Chkdsk
might report errors when no corruption is present.
Volume HD_120GB created 10/17/2015 12:15 AM
Windows is verifying files and folders...
File and folder verification is complete.

Windows has scanned the file system and found no problems.
No further action is...

0 0
0 0

Want to use one external drive for both your Windows PC and your Mac? One hurdle you'll face is that, by default, these platforms use different filesystems. Windows uses NTFS and Mac OS uses HFS and they're incompatible with each other. However, you can format the drive to work with both Windows and Mac by using the exFAT filesystem. Here's how.

In this guide we're using exFAT instead of FAT32, another filesystem that both Windows and Mac can read and write to, because FAT32 has a maximum 4GB file size limit whereas exFAT can work with files as large as 16EB (exabytes). exFAT also performs better than FAT32.

You can format the drive from either the Mac or the Windows machine. However, if you want to use part of the drive for OS X's Time Machine backups, you should do this from the Mac, since there's an extra step to make the drive compatible for Time Machine.

How to Format an External Drive in OS X

1. Connect the drive to the Mac.

2. Open Disk...

0 0

Hi,I had this issue. I did as mentioned above. Device Properties, Policies, and changed to Performance but unchecked Cache option.
Then in command prompt I used the command: :>format E: /fs:ntfs

worked for me.::

:>format E: /fs:ntfs
Insert new disk for drive E:
and press ENTER when ready...
The type of the file system is EXFAT.
The new file system is NTFS.
Verifying 61050M
Volume label (ENTER for none)?
Creating file system structures.
Format complete.
62515820 KB total disk space.
62448168 KB are available.

But there is another easy way,you can use third party software, like as MiniTool partition wizard,there is detail tutorial of How to Convert FAT to NTFS

Hope that...

0 0

I have tried it on two different systems and no, it does not have software. I now have to deal with a 64GB pen drive that has a 'Raw' partition. I am trying to figure out how it got corrupted, since I could not actually do anything with it. I will try to find some way of alleviating this new problem, since I am unable to change the partition using Windows Explorer.

Edit: After following what various people have mentioned and the like on various forums, the pen drive is now undetectable to the computer, has lost its location and I cannot do anything with it. It is rather frustrating that the drive has become corrupted and now I need to figure out what, if anything, I did wrong. Thank you for the response; that's money I'll never get back but if you don't buy a leading brand, this is what you get I guess. Take care and I hope this does not occur again with any of my other flash...

0 0
0 0

Windows can’t normally read Mac-formatted drives, and will offer to erase them instead. But third-party tools fill the gap and provide access to drives formatted with Apple’s HFS+ file system on Windows. This also allows you to restore Time Machine backups on Windows.

If you know you’re going to use a drive on both Mac and Windows, you should use the exFAT file system, which is compatible with both. But if you didn’t foresee that, you may have formatted your drive with Apple’s HFS Plus, which Windows can’t read by default. In fact, some manufacturers sell “Mac” drives pre-formatted with this Mac-only file system.

Don’t Format the Drive! (Yet)

When you connect a Mac-formatted drive to Windows, you’ll be informed that “you need to format the disk in drive X: before you can use it.” Don’t click the “Format disk” button or Windows will erase the contents of the drive–click “Cancel”!

This message appears because Windows doesn’t understand Apple’s...

0 0

Microsoft introduced the new exFAT file system with Vista SP1. Extended File Allocation Table (exFAT) is the successor to the old FAT32 file system. What are the advanatages and disadvantages to this new file system? What are the differences between exFAT and FAT32? When is exFAT preferred over NTFS?

Microsoft released the exFAT file system with Vista SP1. The file system that had been rumored to be released with the original Vista was finally available to the public on a wide scale. This article will explain the issues that exist with FAT32 that exFAT has been designed to fix. Surprisingly to many people, exFAT even may be better than the much loved NTFS in some circumstances.

FAT32 is the file system with which most windows users are most familiar. Windows first supported FAT32 with Windows 95 OSR2 and increased support for it through XP.

FAT32 issues and problems –

By default windows systems can only format a drive up to 32 GB. Additional software...
0 0

Got my Windows 10 key today and I want to install it using a bootable USB flash drive. I have some junk on my 8 GB flash drive which I want to get rid of but when I try to format the drive I don't know which File system should I choose.

There are 3 options which are: FAT32, NTFS and exFAT which one is the best for the installation of Windows 10?

PS: Forgot to mention that before I made this post I used FakeFlashTest to test if the drive had any errors. I used destructive method which means that it erased all the data from my drive and including file system while it was scanning for errors. Now I have to reformat it using Windows. So with which file system should I go ?

Thanks for the help...

0 0

Windows and Mac OS X use different file systems From FAT To NTFS To ZFS: File Systems Demystified [MakeUseOf Explains] . Windows uses the NTFS file system for its internal drives, while Macs use HFS+. External hard disks and USB drives are generally formatted with the Windows FAT32 file system for maximum compatibility — most devices, including Macs, can read and write from FAT32 devices.

Some Mac drives may be formatted with the HFS+ file system Preparing An External Hard Drive For Use With Mac OS X — some drives marketed to Mac users may even come pre-formatted with HFS+. Windows can’t read this file system by default, but there are ways to read that HFS+ drive from Windows.

You’ll probably want to use HFSExplorer for this. Unlike all the other options available here, HFSExplorer is completely free. You can use it to access Mac file systems from Windows without paying a...

0 0

I'm preparing an ADATA S102 Pro 16 GB USB 3.0 flash drive to holding a Windows 8 installation for a new computer. Following a guide, I'm told to clean the drive using Diskpart in Command Prompt, but as I enter the command it returns "Invalid Function". At this point I notice Windows (7) is no longer recognizing my flash drive. So I replug the drive and it shows up, Windows says I need to reformat it. I try, it says "Windows cannot complete the format". If I go around this and format/create a new volume using Disk Management, Windows will recognize it again but using clean/other functions in Diskpart causing Windows to stop recognizing. Is there anything I can do to fix...

0 0