How to create an empty file from command line



Open the Dinesh Command Prompt. Click on the start screen of your computer and go to the search box. Type command prompt or cmd. Double click on Command Prompt from the list of results to open the command prompt. The command prompt will look like this: C:\users\Username>.


Create a new directory. Use the mkdir command to create a new directory to work with. The command is mkdir -> directory name. In the example above, a new directory called wikihow was created by typing: mkdir wikihow.


Change the current working directory. In order to move into the newly created directory, use the cd or change directory command. The command is cd -> directory name. In the example, cd wikihow was typed. Now the prompt looks like this: C:\users\Brian\wikihow> as shown above.


Check the directory contents. In order to check the contents of the current directory, use the dir command. Simply type dir and press enter and a list of the...

0 0

To use the Linux terminal like a pro, you’ll need to know the basics of managing files and navigating directories. True to the Unix philosophy, each command does one thing and does it well.

Midnight Commander, a full-featured file manager for the Linux terminal, acts as a powerful front end to all these commands.

ls – List Files

The ls command lists the files in a directory. By default, ls lists files in the current directory.

You can also list files recursively — that is, list all files in directories inside the current directory — with ls -R.

ls can also list files in another directory if you specify the directory. For example, ls /home will list all files in the /home directory.

cd – Change Directory

The cd command changes to another directory. For example, cd Desktop will take you to your Desktop directory if you’re starting from your home directory.

You can also specify a full path to...

0 0

Do you want to create a text file using command line?. Yes, you can simply create a text file by using some easy codes as shown in the steps below.

Here, we described two methods to do so. Just have a glance at this article in order to find out how to create a text file using command line in Ubuntu 14.04.

Steps to create a text file using command line interface:

Method 1 of 2: Using cat command

Step 1: First, go to the Unity dash and type ”Terminal’‘. You’ll see a terminal icon, just click on it to open.

Step 2: Under ‘Terminal’, type: “cat > your filename.txt” and then press enter, for eg. “cat > test.txt”. The “cat” command is used to create a file. Here, you can enter your text and after that press “Ctrl + D” to exit and return to the command prompt.

Step 3: Now, type; “ls-l your filename.txt” and press enter, where ‘ls’ command displays the list of files. It displays file creation time and date as well as the file...

0 0

Web site demonstrates how to remove the contents of a plain text file on Windows, Linux, and Mac without manually deleting the file and recreating it. This can be done by copying the contents of an empty system file into the file to be emptied:

This will create a new file named t whose contents is the word "test":
$ echo "test" > t
more will display the contents of the file:
$ more t
cat reads the contents of /dev/null (which contains nothing) and > writes this into t$ cat /dev/null > t

The next time you open your file its contents will be empty. Windows users take notice — when you run the command "cat /dev/null" Windows will throw an error. However, it will still successfully empty the contents of your file.

Delete the Contents of a File without Removing and Recreating It...

0 0
[SOLVED] How to record a command line session to a file?

location: - date: May 18, 2011
I recently borked my video driver with a series of upgrades and found my system booting to the TTY with no access to the desktop, graphical login, or even X. I spent some days troubleshooting the problem and experimenting with possible fixes. I found myself wishing for some way to copy and paste from the TTY, or at least log all input and output to a file. I have considered that something like this might lead to a solution: Code:

How to create a spinning command line cursor using python?

location: - date: February 14, 2011
Is there a way to print a spinning cursor in a terminal using Python?

how to connect/disconnect modem with command line (windows)?

location: - date: December 18, 2014
I can connect/disconnect an ethernet card (or any card) with: netsh interface set interface name="realtel"...

0 0
Create a new repository on GitHub. To avoid errors, do not initialize the new repository with README, license, or gitignore files. You can add these files after your project has been pushed to GitHub.

Open TerminalTerminalGit Bash.

Change the current working directory to your local project.

Initialize the local directory as a Git repository.

git init

Add the files in your new local repository. This stages them for the first commit.

git add . # Adds the files in the local repository and stages them for commit. To unstage a file, use 'git reset HEAD YOUR-FILE'.

Commit the files that you've staged in your local repository.

git commit -m "First commit" # Commits the tracked changes and prepares them to be pushed to a remote repository. To remove this commit and modify the file, use 'git reset --soft HEAD~1' and commit and add the file again.

At the top of your GitHub repository's Quick Setup page, click to copy the remote repository URL....

0 0

ow can I create a text file from the command line on Ubuntu Linux? How do I create an empty file from the command line under Ubuntu operating systems?

You can use the following commands:

cat > fileName – Create a text file.

> fileName – Create an empty file.

touch fileName – Create an empty file.

Example – Create an empty file

Open a terminal and type the following command to create a file called foo.txt:


To verify your file, enter:

Example – Create a text file

Open a terminal and type the following cat command to create a text file called bar.txt:

Add text or lines:

This is a test. To swap out hard drive as an external storage you need to use ^D

You need to press [CTRL] + [D] i.e. hold the control key down, then tap d. The > symbol tells the Ubuntu that what is typed is to be stored into the file called bar.txt. To verify your data, enter:

Share this tutorial...
0 0

Create file from command line. We can create files from command line in two ways. The first way is to use fsutil command and the other way is to use echo command. If you want to write any specific data in the file then use echo command. If you are not bothered about the data in the file but just want to create a file of some specific size then you can use fsutil command. To create file using echoecho some- text > filename. Example: C: \> echo This is a sample text file > sample.

C: \> type sample. This is a sample text file. C: \> To create file using fsutilfsutil file createnew filename number_of_bytes.

Example: C: \data> fsutil file createnew sample. File C: \data\sample. Cost To Renew Rn License In Ga - The best free software for your . PM 2,0. 00 sample. C: \data> Limitations.

Steps on how to create a file in MS-DOS and the Windows command line. Steps on how to create a file in MS-DOS. file in MS-DOS or from the Windows Command Prompt. From the command...

0 0

In Linux, we can create an empty file using ‘touch‘ command. There’s no equivalent command for touch in Windows OS. However, we can still create zero byte files using the command fsutil.

The syntax of fsutil command for creating a file is:

fsutil file createnew filename requiredSize

Below is the command you can run to create a empty text file.

fsutil file createnew filename 0


C:\>fsutil file createnew emptyfile.txt 0 File C:\emptyfile.txt is created C:\>dir emptyfile.txt 02/06/2012 10:50 PM 0 emptyfile.txt C:\>

The above command can be run from a batch file also. It works on all Windows editions: XP, Server 2003, Vista, Windows 7, Server 2008.

‘fsutil‘ command should be run from elevated administrator command prompt. Otherwise, you would get the below error message.

c:\>fsutil file createnew emptyfile.txt 0 The FSUTIL utility requires that you have administrative privileges.

Using echo command

In Linux, we can use...

0 0

Fsutil.exe is a built in filesystem tool that is useful to do file system related operations from command line. We can create a file of required size using this tool.

syntax to create a file:

fsutil file createnew filename length

(length is in bytes)

For example, to create a dummy file test.txt, with size as 50MB :

fsutil file createnew test.txt 52428800

Note that the above command creates a sparse file which does not have any real data. If you want to create a file with real data then you can use the below command line script.

echo "This is just a sample line appended to create a big file.. " > dummy.txt for /L %i in (1,1,14) do type dummy.txt >> dummy.txt

(Run the above two commands one after another or you can add them to a batch file.)

The above commands create a 1 MB file dummy.txt within few seconds. If you want to create 1 GB file you need to change the second command as below.

echo "This is just a sample line appended to create...
0 0

If you’re a keyboard person, a lot of things can be accomplished simply using the command line. For example, there are a few easy-to-use methods for creating text files, should you need to do so.

NOTE: When we say to type something in this article and there are quotes around the text, DO NOT type the quotes, unless we specify otherwise.

The first method for creating text files uses the “cat” command. Type the following command at the prompt and press Enter. Replace “sample.txt” with the name you want to use for your file.

cat > sample.txt

After pressing Enter, you are not returned to the prompt. Instead, the cursor is placed on the next line, allowing you to enter text into your file. Type your lines of text, pressing Enter after each one. When you are done, press Ctrl + D to exit the file and return to the prompt.

To verify your file was created, type the following command at the prompt and press Enter.

NOTE: The command...

0 0

I will post something related to WSkids answer as sadly i cannot use the comment function.

Using the CopyHere() method in VBS introduces several issues. One of these issues is that the method returns immediately while the copy process starts in background whereas multiple CopyHere() calls will interfere each other and the ZIP won't be created correctly. A wait loop is needed here to fix that. My wait loop is based on an answer to a similar issue posted here.

Here is an updated version which fixes the "Object required" error reported by pihentagy. It's a timing issue as the newly created ZIP file is included in the Items collection when the script is executed on fast machines.

set Args = WScript.Arguments source = Args(0) ' remove trailing slashes as we add slashes when needed later while Right(source, 1) = "\" source = Mid(source, 1, Len(source) - 1) wend target = Args(1) ' create empty ZIP file set fso = CreateObject("Scripting.FileSystemObject") set zip =...
0 0

If you want to log an event in any of the event log files, then you can do that using eventcreate command. Logging an event helps the system administrators to trace out things if something has not worked in an expected way. Using this command, we can create a custom event with custom id and description. And we can log the event in any of the event log files(System, Application, Security etc). This post attempts to explain the usage of the eventcreate command.

EventCreate syntax

We need to pass certain parameters while creating an event. The basic ones are listed below.

/Id : Event id

/D : Event description

/T: Event type(can be any of error, information, success or warning)

/L : Event log file name

The syntax for creating an event from windows command line is as follows.

eventcreate /Id eventid /D eventDescription /T eventType /L eventLogfileName

Create an event in System log file with an id 500 and with the...

0 0

Windows users
MS-DOS and Windows command line users
Linux and Unix users

Windows users

Tip: To create an empty file (0 bytes) it must be a plaintext file. Other types of documents such as a blank .doc (Word Processor file) or a blank Excel (spreadsheet) file cannot be created. This is because these files contain extra data that structure and identify the file, even if you haven't entered any data into the document.

From within Windows right-click in the area you want to create the file. For example, right-click on the Desktop to create a new text file on the Desktop. From the drop-down menu that appears New and then choose Text Document.

MS-DOS and Windows command line users

Use the copy con command to create an empty file as shown below. The ^Z represents pressing Ctrl + Z on the keyboard once at a blank link. After pressing this shortcut you should get a 1 file copied message.

copy con file.txt

Linux and...

0 0